Teledyne LeCroy TA700 Compliance User Guide - Manual (Page 13)

• MP_13
The IUT C/BE# lines contain valid Byte Enable information during the entire data phase.
(3.31)
In this test a memory read command with two data phases must be executed by IUT. The
CBE#[3:0] of the first data phase must be 0000B and in the second data phase 0001B.
• MP_14
IUT never de-asserts FRAME# unless IRDY# is asserted or will be asserted. (3.3.3.1)
Part of MP_06 test group.
• MP_15
IUT never de-asserts IRDY# until at least one clock after FRAME# is de-asserted. (3.3.3.1)
Part of MP_06 test group.
• MP_16
Once the IUT de-asserts FRAME# it never reasserts FRAME# during the same transaction.
(3.3.3.1)
Part of MP_06 test group.
Compliance Test
13 Rev. 1.0