Teledyne LeCroy TA700 Compliance User Guide - Manual (Page 12)

• MP_09
IUT never uses reserved burst ordering (AD(1:0)=B'11'). (3.2.2)
In this test a memory read command with two data phases must be executed by IUT. The memory
address of this test is incremented by three, e.g. 10000003H.
• MP_11
The IUT AD lines are driven to stable values during every address and data phase. (3.2.4)
In this test a memory write command with two data phases must be executed by IUT. The
CBE#[3:0] in the data phases must be 1100B.
Compliance Test
12 Rev. 1.0