Teledyne LeCroy PETrainer Scripting Language Reference Manual - Manual (Page 88)

Teledyne LeCroy PETrainer Scripting Language
83
16.2.1 Send = MRd32/MWr32
Parameter Value Default Comment
Address 0x00000000:
0xFFFFFFFF 0 Bytes 8-11 in the TLP header.
16.2.2 Send = MRd64/MWr64
Parameter Value Default Comment
AddressLo 0x00000000:
0xFFFFFFFF 0 Bytes 8-11 in the TLP header.
AddressHi 0x00000000:
0xFFFFFFFF 0 Bytes 12-15 in the TLP header.
Note: The Send command supports field substitution (see section 4.1.7). The Send command supports
substitution for the following fields:
o
RequesterId
o Address
o AddressLo
o AddressHi
o PayloadSeed