Teledyne LeCroy PETrainer Scripting Language Reference Manual - Manual (Page 34)

Teledyne LeCroy PETrainer Scripting Language
29
3.4 Packet = Raw
This command initiates transmission of raw data on the bus.
Parameter
Values Default Comment
RawData (X,X,X…) Specifies the array of bytes or 10-bit
symbols to send.
Count 1: 65535 1 Repeats packet specified number of
times.
Note: This command is supported by the PETrainers ML and EML.
The elements of data can be specified in the following formats:
1) Symbols:
Packet = Raw
{
RawData = ( K28.5, D21.5, K28.5, D10.2 )
}
2) Bytes in hexadecimal format with preceding K/D modifier:
Packet = Raw
{
RawData = ( KBC, DB5, KBC, D4A )
}
3) In addition, to generate fully qualified 10 bit symbols, you can specify running disparity sign for each
symbol:
Packet = Raw
{
RawData = ( K28.5+, D21.5-, K28.5-, D10.2- )
}
4) Specify 10 bit symbols in binary, hex, or decimal format:
Packet = Raw
{
RawData = ( 0b0011111010, 0b1100111001, 0b0011111010, 0b1110000110 )
}