Teledyne LeCroy PETrainer Scripting Language Reference Manual - Manual (Page 18)

Teledyne LeCroy PETrainer Scripting Language
13
3.1.5 TLPType = Msg, Msgd
Parameter
Value Default Comment
MessageRoute ToRootComplex
ByAddress
ByID
FromRootComplex
Local
Gather ToRootComplex MessageRoute affects the Type field
of TLP header. (Bits 2:0).
MessageCode Assert_INTA
Assert_INTB
Assert_INTC
Assert_INTD
Deassert_INTA
Deassert_INTB
Deassert_INTC
Deassert_INTD
PM_Active_State_Nak
PM_PME
PME_Turn_Off
PME_TO_Ack
ERR_COR
ERR_NONFATAL
ERR_FATAL
Unlock
Set_Slot_Power_Limit
Vendor_Defined_Type0
Vendor_Defined_Type1
Attention_Indicator_On
Attention_Indicator_Blink
Attention_Indicator_Off
Power_Indicator_On
Power_Indicator_Blink
Power_Indicator_Off
Attention_Button_Pressed
Direct numeric values can
also be used. 0 Byte 7 in the TLP Header
AddressHi 0x00000000:
0xFFFFFFFF 0 Used only if
MessageRoute=ByAddress
AddressLo 0x00000000:
0xFFFFFFFF 0 Used only if
MessageRoute=ByAddress
DeviceID (XX:XX:X) or direct value 0 Used only if MessageRoute=ById.
This parameter can be set in the
following format: (BusNumber :
DeviceNumber : FunctionNumber)