beautypg.com

7 config = link, Config = link – Teledyne LeCroy PETrainer Scripting Language Reference Manual User Manual

Page 48

background image

Teledyne LeCroy

PETrainer Scripting Language

43

Config = Transactions {

AutoCfgCompletion = Yes
; Automatically complete Configuration TLP requests.

}

Note: After this command, automatic completion for Memory and I/O TLP requests are turned off, since
the default value (No) is used for the AutoMemIoCompletion parameter.

6.7 Config = Link


Parameter

Values

Default Comment

FTSCount

0:255

255

Number of FTS ordered sets required
(as sent in TS)

ExtendedSynch

Yes, No

Yes

When set, forces the transmission of
4096 FTS ordered sets.

SkipTimer

In ns (rounded to nearest 8), Off

4720

Periodic timer that controls sending of
SKIP ordered sets at specific intervals.
Timer’s value is measured in 1-us units.



Example:

This example configures the number of Fast Training Sequences to send when transitioning from L0s
state (see Page 32).
This number also is advertised during Link Training.
This command also configures the periodic timer for SKIP Ordered Sets – sent every 4700 ns.

Config = Link
{

SkipTimer = 4700
FTSCount = 255

}