Teledyne LeCroy PETracer ProtoSync Software User Manual - Manual (Page 130)

Chapter 8: Reports and Tools PETracer Software User Manual
124
Teledyne LeCroy
Clicking the Re-Decode button erases the current configuration from this dialog box and
attempts to re-decode based on the information present in the open trace and/or saved
on the disk with the last decode.
Click the Import Config Info button to import the configuration information as an .xml file,
instead of adding it individually. Click the hyper-link XML Schema File Path to access
the required format to generate the .xml file. This schema provides the detailed format for
the imported file. All modern languages are equipped to generate an .xml file on a specific
xml schema. The driver software accepts this schema and generates the ,xml file with all
the required information.
Click the Export Config Info button to export the configuration information as an .xml file.
Click the Reset button to reset the values to the original values. Press the OK button to
save all the values..
PQI PCIe SSD Device Configuration
The PCIe SSD Configuration dialog is used to add missing information to decode the
trace without the configuration space and queue administration information. See figure
on next page for PQI PCIe SSD Device Configuration.
Prior to decoding if every thing is available in Configuration Space then Source equals
Config Space (see figure on next page).