Chapter 3: software overview, 1 the petracer software, Chapter 3 – Teledyne LeCroy PETracer ProtoSync Software User Manual User Manual
Page 11: Software overview, 1 the pe tracer software

PETracer Software User Manual
Chapter 3: Software Overview
Teledyne LeCroy
5
Chapter 3: Software Overview
3.1 The PETracer Software
The PETracer™ software administers Analyzer platforms and handles all CATC Trace
analysis and display. The core software is thus the same for all of Teledyne LeCroy's PCI
Express products.
The software runs on a Windows
®
-based host machine that is attached to the Analyzer
via an Ethernet or USB 2.0 connection (USB 1.0 is also supported). PETracer software
can be used without the Analyzer as a CATC Trace viewer for viewing, analyzing and
printing traces.
The PETracer software operates on systems using Windows 8 (x86 and x64), Windows
Server 2012 (x64), Windows 7 (x86 and x64), Windows Server 2008R2 (x64) and
Windows XP (x86). The latest Service Pack available for the Windows OS in use is
required. It is recommended that you use one of the supported 64-bit Windows versions
listed above as they allow using more RAM than the 32-bit ones.