Amana RSS - Manual (Page 32)

TROUBLESHOOTING GUIDE
(SLIDE IN MODELS)
31 RC231002 Rev. 3
PROBLEMS POSSIBLE CAUSE CORRECTION
Erratic Display Or No
Display No Voltage to Clock/Timer P.C.
Board
Defective Clock/timer P.C.
Board
Defective P.C. Board to Display
Board Interconnect Cable
No Voltage to Display Board
Check for 120 VAC at P.C. boa
TB1 and TB2. If no voltage is
wiring.
Disconnect ribbon cable from
voltages at P.C. board 20 pin
incorrect voltages are indicate
Check interconnect cable for
replace cable.
Check for 2.0 - 3.5 VAC at dis
no voltage is indicated, check
Board.
Clock/Timer Does Not
Respond when a
Pushbutton is Pressed Defective Interconnect Cable
Defective Display Board
Defective P.C. Board
Check interconnect cable for
replace cable.
Check display board function
defective, replace display boa
If interconnect cable and disp
P.C. board.
Beeper Does Not Sound
When Control Function
Buttons Are Pressed.
Time-of-Day Clock and
Timing Functions Operate
Normally. Defective P.C. Board Replace the P.C. Board.
Time-of-Day Display in
Military Time. Not a Problem. This is a Feature
of the Clock/Timer Press "COOK" time and "STO
simultaneously to set clock tim
shut off power to unit, wait (5)
Oven Does Not Heat In
Timer Bake or Self-Clean
Timed Modes. Clock/Timer
Accepts Programmed Time Defective P.C. Board Check K1 relay contacts on P
contacts not closing, replace
Replace Wiring.