Foredom Double Motor Hanger - Manual

Replacement Parts for
MAMH-1 or MAMH-2
Quantity
Part No. Description
Included
UA10658 Safety Hook 2
UA10661 Hanger Rod (horizontal) 1
UA110-5 Set Screws, (10−32 x 1/4 ″) 5
hexagon socket cup point
UA10682 Coupling 2
UA10683 Top Rod 12 1 ⁄
4
″ long with cross hole 1
UA10685 Middle Rod 12 1 ⁄
4
″ long 1
UA10686 Bottom Rod 17 ″ long 1
UA115 3/32 ″ Hex Key 1
MAHR-2 Handpiece Rest 1
1/13 F-10687 Printed in USA
Quantity
Part No. Description Included
For MAMH-1
MABC-1 Clamp Mount 1
For MAMH-2
MABC-2 Base Mount 1
HP103117 Wrench for Base Mount MABC-2 1
Three wood screws are required to attach the
MABC-2 Base to a wall or workbench. Use wood screws
long enough to securely hold the base, motor hanger,
and motor.
MAMH-2
with MABC-2 Base
screws or bolts to bench
or attaches to wall
MAMH-1
with MABC-1 Clamp
attaches to bench
FOREDOM
®
D
ouble Motor Hanger
Safety Instructions
Before using your Foredom power tool, please read safety
instructions. They are for your protection and should always be
followed to reduce the risk of personal injury or damage to the tool.
•
Always wear proper eye and face protection. Wear safety glasses or
face shields whenever you operate a Foredom or any power tool to
prevent serious eye or face injuries.
•
Secure the work piece or item that you are working on in a vise or
other work holding device. Holding it with your hand can result in
serious hand injury.
•
Always use a proper dust collection system or wear a respirator
to prevent the inhalation of dust particles, polishing compounds, or
other debris into the lungs.
•
Do not wear loose fitting clothing or jewelry. Loose clothing or
jewelry can become entangled in the rotating accessory. Do not wear
items such as neckties, necklaces, or bracelets when operating power
tools. Be sure to tie back or secure long hair.
•
Secure hang up motor to motor hanger. Flexible shaft power
tools can “jump” at start up or vibrate during operation. The
tool should be properly secured to prevent it from vibrating
off of the motor hanger or work bench.
•
Never operate any accessory at speeds above its maximum rated
speed. When properly used, all of Foredom’s accessories can be oper-
ated at the speed ratings listed in the Foredom Accessory Catalog or
specified on kits and packages. Always find out the manufacturer’s
speed rating before using accessories other than those from Foredom.
Foredom Electric Company
16 Stony Hill Road, Bethel, CT 06801 USA
•
Tel: 203-792-8622
Fax: 203-796-7861 • Email: [email protected]
www.foredom.net
Wall Mount
set-up
with MAMH-2
using the
MABC-2 Base
attaches to wall
for hanging
one motor