IAI America XSEL-S - Manual (Page 40)

4.
Appendix
34
Ɣ I/O Parameter
No. Parameter name
Default
(reference) Input Range Unit
Remarks
124 Network attribute 5 0H
0H to
FFFFFFFFH
-
EtherNet TCP/IP Message Communication
Attribute
EtherNet Client/Server Classification
(0: Disable
1: Client (Self-Port Number Automatic
Assignment)
(2: Client (Self-Port Number Indication)
ĺ It is not recommended since there are
some device restrictions such like
when close response cannot be
confirmed due to such a reason as the
power supply cutoff of the connected,
and then keep open for approximately
10 minutes after that, it may cause an
error.)
3: Server (Self-Port Number Automatic
Assignment))
*Note: Number of connectable clients
per channel of server port at
the same time = 1
Bit 0 to 3 : IAI Protocol B/TCP
(MANU Mode)
* PC software connection
available when set to Client
Bit 4 to 7 : IAI Protocol B/TCP
(AUTO Mode)
* PC software connection
available when set to Client
Bit 8 to 11 : Free-for-User Channel 31
Bit 12 to 15 : Free-for-User Channel 32
Bit 16 to 19 : Free-for-User Channel 33
Bit 20 to 23 : Free-for-User Channel 34
* The connection is transiently cut at the
switchover of MANU/AUTO mode when the
self-port number, client-server type connected
IP address or connected port number
parameter setting of each mode are not
completely matched.
125 Network attribute 6 31E32H
0H to
FFFFFFFFH
-
Bit 0 to 7 : System Reservation
Bit 8 to 15 : System Reservation
Bit 16 to 23 : Added value (sec) of “software
reset, PC/TP re-connection delay
time” when EtherNet is used
126 Network attribute 7 7D007D0H
0H to
FFFFFFFFH
-
Bit 0 to 15 : System Reservation
Bit 16 to 31 : System Reservation
127 Network attribute 8 5050214H
0H to
FFFFFFFFH
-
EtherNet TCP/IP Message Communication
Attribute
Bit 0 to 7 : CONNECT_TIMEOUT
(Change Prohibited)
(0 Prohibited) (sec)
Bit 8 to 15 : Connection Retry Interval
(IAI Protocol B/TCP)(sec)
Bit 16 to 23 : Send Timeout Value (sec)
Bit 24 to 31 : IAI Protocol B-SIO
non-communication confirmation
timer value (sec)
(IAI Protocol B/TCP Connection
Trigger)
128 Network attribute 9 10000H
0H to
FFFFFFFFH
-
EtherNet TCP/IP Message Communication
Attribute
Bit 0 to 15 : SEL Server Open
Timeout Value (sec)
(No timeout check when set to “0”)
Bit 16 to 23 : Connection Retry Interval
(Tracking Vision System I/F)(sec)