IAI America XSEL-S - Manual (Page 15)

1. Overview
9
1. Overview
EtherNet/IP is an open field network. It is a standardized global open network specified by the
IEC 61158 series of international standards.
You can connect XSEL-R/S/RX/SX/RXD/SXD controllers to EtherNet/IP to build a system with
minimum wiring.
This operation manual shows the explanations for when using the remote I/O communication
in EtherNet/IP.
Refer to the operation manuals listed below which are provided separately when using TCP/IP
message communication.
Function Operation Manual
IAI Protocol B/TCP
Message Communication with SEL
Program
X-SEL EtherNet Operation Manual (ME0140)
Vision System I/F Function X-SEL Controller P/Q/R/S
Vision System I/F Function Operation Manual
(ME0269)
Visual Tracking System
(Cognex Vision System)
Operation Manual (ME0239)
Visual Tracking System
(OMRON Vision System)
Operation Manual (ME0237)
Tracking Vision System Communication
Visual Tracking System
(Keyence Vision System)
Operation Manual (ME0238)
Cauion Ɣ For detailed explanations of EtherNet/IP, refer to the operation manual for the
programmable controller (hereinafter referred to as “PLC”) in which the
master unit is installed.
Ɣ Use this operation manual along with operation manual of each controller.
Ɣ Usage other than the ones described in this operation manual is prohibited.
Ɣ System Configuration Example
Master (PLC)
CPU
Unit
EtherNet/IP
Master
XSEL-R/S/RX/SX/RXD/SXD
-EP (EtherNet/IP Specification)
IN/OUT
Slave, etc.
IN/OUT
Slave, etc.
Hub
IN/OUT
Slave, etc.