IAI America RCS2-GR8 - Manual (Page 12)

6
No.
Operation
Description
Description
8 Maintenance
and Inspection
� When the work is carried out with 2 or more persons, make it clear who is
to be the leader and who to be the follower(s) and communicate well with
each other to ensure the safety of the workers.
� Perform the work out of the safety protection fence, if possible. In the case
that the operation is to be performed unavoidably inside the safety
protection fence, prepare the “Stipulations for the Operation” and make
sure that all the workers acknowledge and understand them well.
� When the work is to be performed inside the safety protection fence,
basically turn OFF the power switch.
� When the operation is to be performed inside the safety protection fence,
the worker should have an emergency stop switch at hand with him so
that the unit can be stopped any time in an emergency.
� When the operation is to be performed inside the safety protection fence,
in addition to the workers, arrange a watchman so that the machine can
be stopped any time in an emergency. Also, keep watch on the operation
so that any third person can not operate the switches carelessly.
� Place a sign “Under Operation” at the position easy to see.
� For the grease for the guide or ball screw, use appropriate grease
according to the Operation Manual for each model.
� Do not perform the dielectric strength test. Failure to do so may result in a
damage to the product.
� When releasing the brake on a vertically oriented actuator, exercise
precaution not to pinch your hand or damage the work parts with the
actuator dropped by gravity.
� The slider or rod may get misaligned OFF the stop position if the servo is
turned OFF. Be careful not to get injured or damaged due to an
unnecessary operation.
� Pay attention not to lose the cover or untightened screws, and make sure
to put the product back to the original condition after maintenance and
inspection works.
Use in incomplete condition may cause damage to the product or an
injury.
* Safety protection Fence : In the case that there is no safety protection
fence, the movable range should be indicated.
9 Modification
and Dismantle
� Do not modify, disassemble, assemble or use of maintenance parts not
specified based at your own discretion.
10 Disposal � When the product becomes no longer usable or necessary, dispose of it
properly as an industrial waste.
� When removing the actuator for disposal, pay attention to drop of
components when detaching screws.
� Do not put the product in a fire when disposing of it.
The product may burst or generate toxic gases.
11 Other � Do not come close to the product or the harnesses if you are a person
who requires a support of medical devices such as a pacemaker. Doing so
may affect the performance of your medical device.
� See Overseas Specifications Compliance Manual to check whether
complies if necessary.
� For the handling of actuators and controllers, follow the dedicated
operation manual of each unit to ensure the safety.