IAI America RCD-RA1D - Manual (Page 7)

1
Safety Guide
“Safety Guide” has been written to use the machine safely and so prevent personal injury or property damage
beforehand. Make sure to read it before the operation of this product.
Safety Precautions for Our Products
The common safety precautions for the use of any of our robots in each operation.
No.
Operation
Description
Precautions
1 Model Selection � This product has not been planned and designed for the application where high
level of safety is required, so the guarantee of the protection of human life is
impossible. Accordingly, do not use it in any of the following applications.
1) Medical equipment used to maintain, control or otherwise affect human life or
physical health.
2) Mechanisms and machinery designed for the purpose of moving or
transporting people (For vehicle, railway facility or air navigation facility)
3) Important safety parts of machinery (Safety device, etc.)
� Do not use it in any of the following environments.
1) Location where there is any inflammable gas, inflammable object or
explosive
2) Place with potential exposure to radiation
3) Location with the ambient temperature or relative humidity exceeding the
specification range
4) Location where radiant heat is added from direct sunlight or other large heat
source
5) Location where condensation occurs due to abrupt temperature changes
6) Location where there is any corrosive gas (sulfuric acid or hydrochloric acid)
7) Location exposed to significant amount of dust, salt or iron powder
8) Location subject to direct vibration or impact
� Do not use the product outside the specifications. Failure to do so may
considerably shorten its life and cause a product breakdown or facility operation
stop.
2 Transportation � Consider well so that it is not bumped against anything or dropped during the
transportation.
� Transport it using an appropriate transportation measure.
� Do not step or sit on the package.
� Do not put any heavy thing that can deform the package, on it.
� When using a crane capable of 1t or more of weight, have an operator who has
qualifications for crane operation and sling work.
� When using a crane or equivalent equipments, make sure not to hang a load that
weighs more than the equipment’s capability limit.
� Use a hook that is suitable for the load. Consider the safety factor of the hook in
such factors as shear strength.
� Do not get on the load that is hung on a crane.
� Do not leave a load hung up with a crane.
� Do not stand under the load that is hung up with a crane.
3 Storage and
Preservation
� The storage and preservation environment conforms to the installation
environment.
However, especially give consideration to the prevention of condensation.