IAI America RCD-RA1D - Manual (Page 10)

4
No.
Operation
Description
Precautions
7 Automatic
Operation
� Before the automatic operation is started up, make sure that there is nobody
inside the safety protection fence.
� Before the automatic operation is started up, make sure that all the related
peripheral machines are ready for the automatic operation and there is no error
indication.
� Make sure to perform the startup operation for the automatic operation, out of the
safety protection fence.
� In the case that there is any abnormal heating, smoke, offensive smell, or
abnormal noise in the product, immediately stop the machine and turn OFF the
power switch. Failure to do so may result in a fire or damage to the product.
� When a power failure occurs, turn OFF the power switch. Failure to do so may
cause an injury or damage to the product, due to a sudden motion of the product
in the recovery operation from the power failure.
8 Maintenance and
Inspection
� Perform the work out of the safety protection fence, if possible. In the case that
the operation is to be performed unavoidably inside the safety protection fence,
prepare the “Stipulations for the operation” and make sure that all the workers
acknowledge and understand them well.
� When the work is to be performed inside the safety protection fence, basically
turn OFF the power switch.
� When the operation is to be performed inside the safety protection fence, the
worker should have an emergency stop switch at hand with him so that the unit
can be stopped any time in an emergency.
� When the operation is to be performed inside the safety protection fence, in
addition to the workers, arrange a watchman so that the machine can be stopped
any time in an emergency. Also, keep watch on the operation so that any third
person can not operate the switches carelessly.
� Place a sign “Under Operation” at the position easy to see.
� For the grease for the guide or ball screw, use appropriate grease according to
the Operation Manual for each model.
� Do not perform the dielectric strength test. Failure to do so may result in a
damage to the product.
� When releasing the brake on a vertically oriented actuator, exercise precaution
not to pinch your hand or damage the work parts with the actuator dropped by
gravity.
* Safety Protection Fence : In the case that there is no safety protection fence, the
movable range should be indicated.
9 Modification � Do not modify, disassemble, assemble or use of maintenance parts not specified
based at your own discretion.
� In such case, the warranty is not applied.
10 Disposal � When the product becomes no longer usable or necessary, dispose of it properly
as an industrial waste.
� Do not put the product in a fire when disposing of it.
The product may burst or generate toxic gases.