IAI America RCD-RA1D - Manual (Page 20)

5. T
ransportation
14
5. Transportation
5.1 Handling of Robot
5.1.1 Handling the Packed Unit
Unless otherwise specified, the actuator is shipped with each axis packaged separately.
� Do not damage or drop. The package is not applied with any special treatment that enables it to resist an
impact caused by a drop or crash.
� Transport a heavy package with at least more than two operators. Consider an appropriate method for
transportation.
� Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow the operation if
there is any for the packaging condition.
� Do not step or sit on the package.
� Do not put any load that may cause a deformation or breakage of the package.
5.1.2 Handling the Actuator After Unpacking
� Do not carry an actuator by a cable or attempt to move it by pulling the cable.
� Hold the body base when transporting the actuator.
� Be careful not to bump the actuator into anything when moving it.
� Do not apply an excessive force to each part of the actuator.
Supplement) For the names of each part of the actuator, refer to “Names of the Parts”.