SKC Limited Haz-Dust IV - Manual (Page 72)

Cleaning the Sensor Optics
Introduction It is important to keep the sensor optics of the Haz-Dust IV clean to ensure
the integrity of the optical sensor.
The sensor optics need to be checked every 48 hours when used in a
2 to 3 mg/m
3 T.W.A. environment, and on a weekly or monthly basis in less
contaminated locations.
Cleaning the
Sensor Optics Follow the steps in the table below to clean the sensor optics.
Figure 5-2. Picture of the cleaning kit.
Continued on next page
5 - 12