Setting the alarm – SKC Limited Haz-Dust IV User Manual
Page 21
Setting the Alarm
Introduction
An audible alarm can be set to alert the worker of approaching threshold
limits.
Alarm settings
The concentration level must be set to the defined agency standard for the
particulate type being sampled.
Note: See Appendix B for a listing of the most common dust particulates and
their corresponding concentration levels.
Using the alarm
Follow the steps in the table below to set the alarm level.
Step Action
1
Select Special Functions from the Main Menu.
2
Select Set Alarm.
3
Enter the appropriate concentration level using the table below.
To... Press...
Increase the value of the
selected digit.
<
↑ >
Decrease the value of the
selected digit.
<
↓ >
Select the next digit.
ENTER
4
Press ENTER after the last digit is entered.
Result: The alarm has been set and the Main Menu appears.
2 - 4