SKC Limited Haz-Dust IV - Manual (Page 40)

Reviewing Stored Data,
Continued
5 Enter the desired Location in the Location Select Screen using the
table below (figure 3-11).
To... Press...
Increase the value of the selected digit. < ↑ >
Decrease the value of the selected digit. < ↓ >
Select the next digit or field. ENTER
6 Press ENTER when the desired location code has been entered.
Result: The Scanning Memory Screen displays. If the location is
being reviewed for the first time scrolling dots will appear
indicating the microprocessor is computing data.
7 The first of five statistics screen appears when data is computed.
Scroll through the statistics screens using the table below.
Press... To Scroll...
< ↓ > Forward through the statistic screens.
< ↑ > Backward through the statistic screens.
** Location Select **
Range: 001 thru 002
Loc: 002
Figure 3-11. Location Select Screen. Range: indicates number of location files stored in
memory. Loc: indicates location code being reviewed.
3 - 16