SKC 100-3000 Leland Legacy - Manual (Page 4)

1
The Leland Legacy
®
dual diaphragm sample pump is designed specifi cally
to provide constant airflows from 5 to 15 L/min with minimum power
requirements and low noise. Diaphragm and valve design minimizes power
requirements and reduces noise. Incoming and outgoing airfl ow is pulsation
dampened. The lightweight Leland Legacy is housed in a thermoplastic
material for strength and features an overmolding of soft rubber that protects
against damage and reduces noise. Powered by a rechargeable Li-Ion batt ery
pack, the Leland Legacy provides 24-hour run times at 10 L/min and 12 inches
water back pressure. The pump’s patented internal fl ow sensor measures fl ow
directly and acts as a secondary standard, constantly maintaining the set fl ow
rate. Built-in sensors automatically correct fl ow for variations in temperature
and atmospheric pressure. Advanced programming features are available when
used with a PC and DataTrac
®
for Leland Legacy Soft ware. The performance of
the Leland Legacy pump with the Sioutas Impactor has been verifi ed through
EPA-ETV.
Leland Legacy Sample Pump
Description
Soft Rubber
Overmolding
protects against
damage
Liquid
Crystal
Display
(LCD)
Keypad
with large
operating
buttons
Flashing LED
Run Indicator
Battery
Status
Icon
Li-Ion
Battery
Pack
for 24-hour
run times
(included)
Not shown:
Beltclip (back)
Battery Charging
Jack (top)
Computer Interface
Port (top)
Filter Retainer
with protective cover