SKC 228-9605 VAC-U-GO Sampler - Manual

Sampling Pump
Catalog No. 228-9605 and 228-9605B
The Vac-U-Go non-compensating vacuum pump is a rotary vane-type pump
that provides fl ows up to 30 L/min and maintains sonic fl ow when used with the
BioSampler
® . AC-powered, the Vac-U-Go Sampling Pump can be used for a variety
of ambient and indoor air sampling applications including asbestos, bioaerosol,
stack, VOC, and fenceline monitoring. It is ideal for sampling bioaerosols using
the SKC BioSampler or the AGI-30 Impinger.
The line-operated Vac-U-Go Sampling pump has a permanently lubricated motor
that is mounted in a housing with a vacuum pressure gauge to indicate sonic fl ow
and a thrott ling valve to adjust fl ow. Both models are supplied with an extension
rod for mounting media and a power cord.
Performance Profi le
Flow range: Non-compensated airfl ow up to 30 L/min
Sonic fl ow with BioSampler (acts as a critical orifi ce) is
approximately 12.5 L/min
Motor: Oil-less rotary vane
Vane life: Approximately 6000 to 27,000 hrs depending on application
Power: Line power only
115 V, AC, 60 Hz (Cat. No. 228-9605)
230 V, AC, 50 Hz (Cat. No. 228-9605B)
Operating
temperature range: 32 to 104 F (0 to 40 C)
Size: 5.5 x 10.5 x 6.5 ins (13.9 x 26.7 x 16.5 cm)
Weight: 12 lbs (5.4 kg)
Standards: None. Pump is not intrinsically safe
Tubing: 1/4-inch ID reinforced polyurethane tubing
Not intended for use outdoors
Operating Instructions
863 Valley View Road, Eighty Four PA 15330 USA
[email protected]