SKC 100-3000 Leland Legacy - Manual (Page 23)

20
Programming the Pump Using a PC
The Leland Legacy can be programmed manually, with its integral keypad,
or by using a personal computer and DataTrac for Leland Legacy Soft ware
for full programmability.
Install DataTrac Soft ware onto a PC and connect the PC to the Leland Legacy
pump data port with the provided cable adapter. With DataTrac, you can:
• Create and save a Leland Legacy run schedule in pump memory for use
in the fi eld at a later time.
• Program a sampling strategy of up to 26 sampling sequences and fl ow
rates.
• Program a delayed start, timed shutdown, or perform STEL and
replicate samples.
• Create a sample and analysis sheet for all critical information.
• Print or save to a PC fi le a complete history of run time data.
• Create a worker exposure profi le containing sample and analysis
information along with the pump’s history. Then, import this into a text
document.
• Document CalChek pump calibration.
For complete information on programming the Leland Legacy Pump using
DataTrac for Leland Legacy Soft ware, consult the DataTrac Operating
Instructions (included on soft ware CD).
Programming