Securitron FMK-SL - Manual (Page 6)

PN# 500-22190
Page 6 Rev. D, 04/11
Magnalock ® - Position the lock template onto Bracket #3, mark only the four corner holes
for the Magnalock. Carefully center punch and drill all four holes with a 13/64” bit and tap for
1/4-20 machine screws. Install the lock using the hardware as shown in FIG 6B. Complete
installation of the Magnalock lock by referring to FIG 6B and following the installation guide
included with the Magnalock.
FIG 6B
Installing the strike “U” Bracket (#1) to the gate post
Close the gate and align the strike bracket on the fence post to match the position of the lock
bracket as shown in FIG 7, using the bracket as a template, carefully mark the four through-
hole locations onto the post.
Remove the bracket and carefully center punch and drill the four locations using a 5/16” bit,
reinstall the bracket and install the shims and hardware as shown in FIG 7.
FIG 7