Robertshaw SlimZone Deluxe ZONE CONTROL SYSTEM User Manual
Page 5

1. INTRODUCTION
The Robertshaw Slimzone Deluxe logic panel is designed for residential and light commercial
constant volume heating and air conditioning zone control applications. The Deluxe panel
incorporates a solid-state, microprocessor based logic board containing dedicated wiring
terminals for interface with a single piece of heating and cooling equipment, zone thermo-
stats, motorized zone dampers, and a wide range of optional peripheral devices.
The Slimzone Deluxe (2701-002) will control up to 3 individual zones and can be expanded
to 7 zones in increments of two using Slimzone Deluxe Expander Modules (2701-003).
2. OPERATIONAL FEATURES
•
Controls gas, oil, electric, add-on heat pump (duo fuel), or heat pump equipment
•
Controls up to 2 stages of heating and 2 stages of cooling for heat/cool equipment
•
Controls up to 3 stages of heating and 2 stages of cooling for heat pumps
•
First call priority – timeshare control algorithm
•
Switch selectable:
- Time or numerical zone upstaging
- Time upstage delay of 5, 10, 15, or 20 minutes
- 45 second fan purge
- Heat pump auxiliary heat upstage of 5, 10, or 20 minutes
- G2 fan based on number of zones
- G2 fan based on number of stages
- Intermittent or continuous fan operation
- Economizer power terminal using G2
- On-board heat/auto/cool mode with dedicated terminals for external selector switch
- On-board emergency heat with dedicated terminals for external SPST switch
- Equipment switch (heat/cool, heat pump, add-on heat pump)
- Plenum fan
•
Computer controlled minimum on/off time delays to prevent equipment short cycling
•
On-board time delay override button for test, check, and startup
•
Dedicated terminals for:
- Each 4 or 5 wire single stage zone thermostat
- Independent power of each 2 or 3 wire motorized zone damper
- Logic panel power
- Ground (one only)
- Zone damper power
- High/low limit down staging
- High/low balance point control
- Occupied/unoccupied system scheduling clock
- Smoke detector input
•
LED (light emitting diode) indication for:
- All system outputs
- 24 volt power
- When off time delay is active
- Confirming normal operation
•
Outputs are recoverable fuse protected (poly-switches)
•
Ambient operating temperature range of 14˚ to 158˚ F (-10˚ to 70˚ C)
SlimZone Deluxe
1