Reese 61302 SIDEWINDER - Manual

Installation Instructions
Sidewinder
TM
Turret
Part Number:
61302
DEALER/INSTALLER:
(1) Provide this Manual to end user
Turret Shown Assembled With Arm
END USER:
(1) Read and follow this Manual for Sidewinder Turret Installation.
(2) Save this Manual for Future Reference.
(3) For Sidewinder Arm Installations, Refer to Arm Installation Manuals.
(4) Pass on copies of Manual to any other users or owner.
Equipment Required:
Wrenches: 15/16”
Drill Bits: Not Required
Fastener Kit: 61302F
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating,
Trailer Manufacturer’s Rating or
Max Gross
Trailer WT (LB)
Max Pin
WT (LB)
Note: These Instructions Are Only For Installation Of Turret Into Wing Sets.
You Should Refer To The Installation Instructions For Your Sidewinder Arm.
Torque Wrench
1
Qty. (1) Turret 61302 (Formally ST300)
2
Qty. (1) Upper Wear Plate
3
Qty. (1) Bushing
( ) ( )
16,000 LB 3,200 LB
Figure 1
4
2
3
1
INDEX
1. GUIDELINES FOR MATCHING WING SET P. 1-2
2. ASSEMBLY INSTRUCTIONS P. 2
3. 5 YEAR LIMITED WARRANTY P. 3
y ( ) g
4
Qty. (1) Hardware Kit
4 1
Figure 2
For Wing Set Make and Model Numbers:
Venture CJ13515
Venture CJ13517
Matching Wing Sets
Venture CJ13517
Venture CJ20517
M-Tec RVPN1409 (Note Rating)
Use The Bolt Hole Locations Noted By The “A”
The pattern is a 8” horizontal & a 1 1/2” vertical
Trailer Forward
2009 Cequent Performance Products, Inc Sheet 1 of 3 61302IN 5/3/2011 Rev. A
Form: F205 Rev A 5-6-05
WARNING:
Failure to follow all of these instructions may result in death or serious injury!