beautypg.com

Reese 44666 PROFESSIONAL RECEIVER User Manual

Installation instructions, Jk j k, Hyundai tucson kia sportage

background image

Installation Instructions

HYUNDAI TUCSON

KIA SPORTAGE

Part Numbers:

75717
87612
44666

75188

U-HAUL

Hitch Shown In Proper Position

Wiring Access Location: SUV1, SUV2 (Tucson)

SUV1, SUV5 (Sportage)

Equipment Required:

Wrenches: 16mm

Drill Bits: NONE

©

2011, 2012, 2013 Cequent Performance Products, Inc.

Sheet 1 of 3

75717N

10-24-13

Rev. C

j

Qty. (4)

Hex Bolt

– M10 x 1.25 x 30mm CL 10.9

k

Qty. (4)

Conical Washer

– 3/8”

Tighten all M10 CL 10.9 fasteners with torque wrench to 42 Lb.-Ft. (57 n*m)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Fastener Kit: 75717F

Form F206 Rev A 5605

1. Raise vehicle with hoist or ramps for access to underside.

2. While supporting exhaust remove rear hangers and lower exhaust until hitch can be positioned over the

muffler tips and into position aligning slots in hitch with existing weld nuts in the bottom of frame.

3. Loosely install the M10 hex bolts with conical washers, (4) four places, as shown.

4. Tighten all M10 CL10.9 fasteners with torque wrench.

5. Reinstall rear hangers for exhaust.

FASCIA

j

k

j

k

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

5250 (1816 Kg)

525 (182Kg)

Weight Carrying

Ball Mount

3500 (1589Kg)

525 (159Kg)

EXSISTING WELD NUTS
BOTH SIDES

FRAME

KIA SPORTAGE

HYUNDAI TUCSON

NOTE: If additional exhaust clearance is required, bend exhaust hanger rod appropriately

Printed in México