beautypg.com

Without fuel tank shield, Limited warranty – Reese 37053 PREMIUM RECEIVER User Manual

Page 2

background image

2. IF VEHICLE IS NOT EQUIPTED WITH A FUEL TANK SHIELD, ATTACH FRAME BRACKET TO DRIVERS SIDE USING

SUPPLIED 12MM BOLTS WITH 1/2” LOCK WASHERS AND 1/2” STRUCTURAL WASHERS INTO EXISTING WELD NUTS
IN VEHICLE FRAME. REPEAT FOR PASSENGER SIDE LEAVING HARDWARE LOOSE.

3. ATTACH HITCH CENTER SECTION TO FRAME BRACKETS USING SUPPLIED 3/8” RIBBEDNECK BOLTS THROUGH THE

CENTER SECTION AND FRAME BRACKET, APPLY 3/8” LOCK WASHERS AND 3/8” HEX NUTS TO OUTSIDE OF FRAME
BRACKETS.

4. TORQUE 12MM HARDWARE TO 70LB-FT AND 3/8” HARDWARE TO 35 LB-FT.

EXISTING WELDNUTS IN

VEHICLE FRAME 3 PER SIDE

VEHICLE FRAME RAIL

1/2” STRUCTURAL WASHER

1/2” LOCK WASHER

12MM 1.75 X 40MM HEX BOLT

3/8” RIBBED NECK BOLT

3/8” LOCK WASHER

3/8” HEX NUT

FRAME

BRACKET

HITCH

CENTER SECTION

WITHOUT FUEL

TANK SHIELD

For Installation Assistance or Technical Help, See our Web Site at

www.reeseprod.com or Call 1-219-266-3993

Reese warrants its Hitches, custom Hitch Receivers, and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and excepted, for the ownership life of the original consumer purchaser. Reese will replace FREE OF CHARGE any part which proves defective in
material or workmanship when presented to any Reese dealer, Reese Warehouse or return to factory. TRANSPORTATION CHARGES PREPAID, at the address
below. THIS WARRANTY IS LIMITED TO DEFECTIVE PARTS REPLACEMENT ONLY. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION OR
REPLACEMENT AS WELL AS INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damage to the Hitch, Custom Hitch receiver
or Sway Control as a result of misuse, abuse, neglect, accident, improper installation, or any use violative of instructions furnished by us, WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem
Reese warrants its Hitches, Custom Hitch Receivers and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and tear excepted, for the ownership life of the original consumer purchaser.
with warranty service or performance, you may be able to go to a small claims court, a state court, or a federal district court.

Reese Products, Inc.
51671 State Road 19-N
Elkhart, IN 46514

Reese Products of Canada, Ltd.
2351 Winston Park Drive
Oakville, Ontario
Canada L6K6R7

LIMITED WARRANTY

THIS PRODUCT COMPLIES WITH SAFETY SPECIFICATION AND REQUIREMENTS FOR THE STATE OF NEW YORK AND VESC REGULATION V-5 FOR CONNECTING DEVICES AND
TOWING SYSTEMS. WEIGHT DISTRIBUTING HITCH RATING IS 5000 LB. MAX. GROSS TRAILER WEIGHT AND 500 LB. MAX. TONGUE WEIGHT. WEIGHT CARRYING HITCH RATING IS
4000 LB MAX GROSS TRAILER WEIGHT AND 400 LB MAX TONGUE WEIGHT. CONSULT VEHICLE OWNERS MANUAL FOR TOWING RECOMMENDATIONS AND LIMITATIONS.

37053IN-1SEP01A PCN5682 © 2001 REESE PRODUCTS, INC.

Litho in USA