Reese 45288 TITAN RECEIVER - Manual (Page 2)

Installation Instructions Part Numbers:
45288
Rev. D 5-9-08 N45288 Sheet 2 of 2 z 2005, 2008 Cequent Towing Products
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
Form: F205 Rev A 5-6-05
Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Tighten all 9/16-12 GR5 fasteners with torque wrench to 120 Lb.-Ft. (163 N*M)
Vehicle frame rail
Vehicle crossmember
Frame spacer
Note: Blocks must be slid/pushed into place before fishwiring bolts.
Vehicle crossmember
Frame spacer
Vehicle frame rail
Hitch side bracket
Fishwire carriage bolts thru
slots in frame to bolt holes
2 places each side
Dodge Ram Pick-Up
With or Without O.E.M. Hitch
Long Bed Only