Ransburg Vector Solo 79900 Solventborne RS90-AS - Manual (Page 14)

Vector Solo Applicators - Introduction
10
Fluid Flow
Capacity: 1000 ml/minute**
Wetted Parts: Stainless, polyethylene,
nylon, acetal polymer
Operating Pressure (Air Spray)
Fluid: (0-6.9 bar) 0-100 psi
Air: (0-6.9 bar) 0-100 psi
Ambient Temp.: 40°C to 0°C
(104°F to 32°F)
Consumption: 470 SLPM (16.6 SCFM) @
2.8 bar (40 psig) @ Handle
Inlet
Sound Level: 92dB (A) @ 2.8 bar
(40 psig) Inlet,
1m from applicator
Vibration Level: 0.065 m/S 2 @ 2.8 bar
(40 psig) @ Handle Inlet
** This reflects the maximum fluid volume the appli-
cator can deliver. The maximum spray volume that
can be effectively atomized depends on fluid rheolo-
gy, spray technology, and finish quality required.
Applicator Length: 320mm (12.6-inches)
Weight: 880 grams (31.0 oz.)
Hose 79727-XX
Lengths (Std): 10m, 15m, 20m, and 30m
Atomizer Nozzle
Assembly (Std): 79374-65, 79377-44 (1.4mm)
Operating Voltage: 85kV DC (-) maximum
Current Output: 130 microamperes maximum
Paint Resistance:* .1 MW to ∞
*(Use Model No. 76652, Test Equipment)
Part Sprayability: Determine sprayability of
part to be coated using
76652, Test Equipment
(See current "Paint, HV & SCI Test Equipment"
service manual.)
79900 VECTOR SOLO SOLVENTBORNE
SPECIFICATIONS
Environmental/Physical
Electrical
Mechanical
Ransburg
AH-08-01.10