Fairbanks H90-5200-A Digital Instrument - Manual (Page 42)

APPENDIX III: Switch Settings for Selected Printers
The following printers are not manufactured by Fairbanks, but may be interfaced to the
H90-5200-A series instrument. The switch settings are furnished to aid in setting-up
these printers.
1. Interface to Okidata Model 182 Serial Printer (Fairbanks Model 50-3920)
Using the Printer Handbook included with the Printer, set the Printer internal switches
per the following tables:
Switch on Printer Controller PCB
Function
1 2 3 4 5 6 7 8
ASCII - US ON OFF OFF
11” Form OFF ON
Length
No Auto LF
OFF
8 Bit Data ON
Not Used* OFF
*Must remain in the OFF Position
Switch on Printer Serial Interface PCB
Function
1 2 3 4 5 6 7 8
Busy Signal (SSD) ON
Baud Rate (1200)**
OFF OFF ON
Not Used* OFF
Panty (8 Bit System) ON
Pin 20 Busy (DTR) OFF
Not Used* OFF
*Must remain in the OFF Position
** Speed Switch 2 Switch 3 Switch 4
9600 ON ON ON
4800 OFF ON ON
2400 ON OFF ON
1200 OFF OFF ON
600 ON ON OFF
300 OFF ON OFF
150 ON OFF OFF
110 OFF OFF OFF
50515 42 Issue #2 4/04