Fairbanks H90-5200-A Digital Instrument - Manual (Page 28)

standard CTS operation or printer with busy, active low).
Serial Output Operation and Programming:
Clear to Send (CTS) Selection
Port 1 Only
CTS Value
50-3710 1
50-3715 1
50-3920 (Oki 182) 0
50-3921 (Oki 184T) 1
50-3925/SP2000/SP2200 0
PTR-3950/610 0
50-3960/295/590 0
Computer with CTS Handshake 1
Remote Display 0
20mA Current Loop 0
With ACC 146 Installed
Port 1
& Port 2 CTS Value
50-3715 50-3921 1
50-3715 PTR-3950 1
50-3715 50-3960 1
SP-2000 1
50-3960 50-3715 0
50-3960 50-3921 0
50-3960 PTR-3950 0
50-3921 50-3715 1
50-3921 50-3960 1
50-3921 PTR-3950 1
PTR-3950 50-3715 0
PTR-3950 50-3921 0
PTR-3950 50-3960 0
Switch settings on ACC-146: 1, 3, 5, and 8 ON.
h. The instrument will now return to the normal weigh mode.
2. Programming the Serial IO Format
There are 3 channels available
Channel 1 - Standard Serial Port
Channel 2 - RS232 / 20mA CL
Channel 3 - RS422/485 Output
a. Press FUNC, 3 to enter IO calibration mode. The display will show ‘CAL IO”.
Press the number of the IO channel you wish to format.
50515 28 Issue #2 4/04