Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) - Manual (Page 8)

08/13 8 51219 -- Rev. 6
Section 2: Installation
2.1. General Service Policy
1. Prior to installation, it must be verified that the equipment will satisfy the
customer's requirements as supplied, and as described in this manual. If the
equipment cannot satisfy the application and the application cannot be modified
to meet the design parameters of the equipment
, the installation should not
be attempted.
2. Installation procedures for printers and other peripherals are given in
manuals specifically provided for those units. The instructions include a pre-
installation checkout which must be performed either at the service center
before the technician goes to the site, or at the site before he places the
equipment in service.
3. Absolutely no physical, electrical, or program modifications other than
selection of standard options and accessories are to be made to this
equipment. Electrical connections other than those specified may not be
performed, and no physical alterations (mounting holes, etc.) are allowed and
will immediately void warranty.
Absolutely no physical, electrical or program modifications other
than selection of standard options and accessories can be made
by customers to this equipment
Repairs are performed by Fairbanks Scales Service Technicians
and Authorized Distributor Personnel ONLY!
Failure to comply with this policy voids all implied and/or
written warranties.
W A R N I N G !