Settings – Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) User Manual

Page 14

08/13

51219 -- Rev. 6

Section 3: Programming

3.1. Settings

1. Press and hold any one of the following keys

, or

while turning the scale ON.

is shown on the LCD

display.

2. Press

key to scroll among the

, and

menus.

3. Select

, press the

key to enter General Settings menu.

Press the

key to scroll among the settings. Press the

key

to confirm selection.

4. Select

, press the

key to enter the Print Settings menu.

Press the

key to scroll among the settings. Press the

key

to confirm selection.

5. Select

, press the

key to enter RS-232 Settings menu.

Press the

key to scroll among the settings. Press the

key

to confirm selection.

7. Select

, press the

key to enter the Save Settings menu.

Press the

key to scroll among the settings. Press the

key

to confirm selection.

Note:

To access

, the JP3 jumper must be removed from the

PCB first. Place the JP3 jumper back when configuration and calibration
is complete. All other programming may be accomplished in this
secured programming area also.