Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) - Manual (Page 38)

08/13 38 51219 -- Rev. 6
Appendix III: Battery Kits Installation
Stainless Steel Product No. 30048
Install the 27391 rechargeable battery kit as follows:
1. Remove power from the instrument by unplugging power cord from the AC
receptacle.
2. Remove the ten (10) screws and security seal from the front of the instrument.
3. Carefully open the instrument and disconnect the power connector at CN1.
4. Remove the two (2) nuts on the transformer / battery bracket and lift the bracket
away carefully.
5. Insert the battery into the recessed area of the transformer / battery bracket. The
battery terminals should be towards the right.
6. Reattach the transformer / battery bracket.
7. Connect the battery cable to CN2.
8. Reconnect the power connector to CN1.
9. Close the instrument covers and re-install the ten (10) screws and security seal.
ABS Product No. 30047
Install the 24921 rechargeable battery kit as follows:
1. Remove power from the instrument and disconnect power supply from the AC
power receptacle.
2. Remove the two (2) Philips screws and security seal from the back of the
instrument.
3. Carefully open the instrument and disconnect the RS232 connector and power
connector.
4. Insert the battery into the recessed area of the back cover.
5. Attach the battery strap using the two (2) Philips screws provided in the kit.
6. Connect the battery cable to CN2.
7. Reconnect the RS232 connector to CN3 and the power connector to CN1.
8. Close the instrument covers together and install the two (2) Philips screws and
security seal.