Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) - Manual (Page 41)

08/13 41 51219 -- Rev. 6
Appendix VI: Software Revisions
Programming Menu Access
– Scale Settings
With the power removed from the instrument, remove the jumper, JP3,
inside the instrument. This will permit access to the configuration menu.
Software Versions 1.5 and lower
Press the key to turn the scale ON. is shown on the LCD
display. Press key to scroll to the menu.
Calibration Menu Access
– Calibration
With the power removed from the instrument, remove the jumper, JP3,
inside the instrument. This will permit access to the calibration menu.
Software Versions 1.5 and lower
Press the key to turn the scale ON. is shown on the LCD
display. Press key to scroll to the menu.
Load factory defaults
Software Versions 1.5 and lower
To load the factory defaults in the instrument, perform the following:
1. With the power removed from the instrument, remove the jumper,
JP3, inside the instrument. This will permit access to the save menu.
2. Press the key to turn the scale ON. is shown on the
LCD display.