Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) - Manual (Page 13)

Section 2: Installation
08/13 13 51219 -- Rev. 6
2.8. Load factory defaults
To load the factory defaults in the instrument, perform the following:
1. With the power removed from the instrument, remove the jumper,
JP3, inside the instrument. This will permit access to the save menu.
2. Press and hold any one of the following keys , , , or
while turning the scale ON. The display will indicate ,
continue to hold keys until is shown on the LCD display.
3. Press key to scroll until the menu is reached.
4. Press key to select the setting.
5. In the menu, press key to scroll and select .
6. Press key to choose the setting.
7. will reset the scale and load the factory default settings.
8. The unit is ready to be configured and calibrated. Refer to the
appropriate sections to program and calibrate the instrument.