Overview, Conferring with our client – Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) User Manual
Page 52
Section 2: Company Service Information
11/10
8
51233 Rev. 4
OVERVIEW
Physical Installation Notes
Check all devices for proper operation. If any error messages occur, refer to
Troubleshooting or the proper manual of that device.
Only those charges which are incurred as a result of the equipment's
inability to be adjusted to performance specifications may be charged to
warranty.
No physical alterations (mounting holes, etc.) are allowed during installation.
The installing technician is responsible that all personnel are fully
trained and familiar with the equipment's capabilities and
limitations before the installation is considered complete.
All electrical assemblies must be replaced as assemblies or units.
─ Replacement of individual components is not allowed.
─ These components must be returned intact for replacement credit per normal
procedures.
All electronic and mechanical adjustments are considered to be part of the
installation, and are included in the installation charge(s).
─ Included is any required computer programming or upgrades.
─ Included are any accuracy and/or operational specification changes.
The AC receptacle / outlet shall be located near the Instrument and easily
accessible.
Electrical connections other than those specified may not be performed.
Conferring with Our Client
The technician must be prepared to recommend the arrangement of components
which provide the most efficient layout, utilizing the equipment to the best possible
advantage.
The warranty policy must be explained and reviewed with the customer.