Safety messages – Teledyne 9110T - Nitrogen Oxides Analyzer User Manual
Page 7
Model 9110TH NOx Analyzer
Safety Messages
Teledyne Analytical Instruments
vii
SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of avoiding personal
injury or instrument damage. Please read these messages carefully. Each safety message is associated
with a safety alert symbol, and are placed throughout this manual and inside the instrument. The symbols
with messages are defined as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message for
specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without protection or
proper tools could result in damage to the part(s) and/or the instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the central
safety grounding point for the instrument.
CAUTION
GENERAL SAFETY HAZARD
The T100 Analyzer should only be used for the purpose and in the
manner described in this manual. If you use the T100 in a manner other
than that for which it was intended, unpredictable behavior could ensue
with possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es).
Note
Technical Assistance regarding the use and maintenance of the 9110T or
any other Teledyne product can be obtained by contacting Teledyne’s
Customer Service Department:
Phone: 626-934-1500
Email:
or by accessing various service options on our website at
http://www.teledyne-ai.com/
.