Alamo Axtreme 02984405 - Manual (Page 99)

© 2006 Alamo Group Inc.
Section 10 - 3
Axtreme Boom ( Asy. Man.) 07/06
Fill Hydraulic Tank
Fill Hydraulic Tank with Oil:
5. Fill Tank. Fill the Hydraulic Tank (See Figure
4) Fill tank till the Oil is visible in the sight Gauge (See
Figure 5 & 7). This will fill tank for the start but it will
have to filled again later. Read Step 6 a must.
6. Fill Suction Hose with Oil.
This is an important step that must be
done. Remove the Suction Hose at the pump (See
Figure 6) and fill the hose with clean oil, also oil can be
put into the pump, This will prevent Dry start up of
Pump. Dry start up of PUMP will damage the Pump.
After filling suction Hose reinstall it and tighten down
Hose fittings. (See Figure 6)
FIGURE 7
Sight Gauge
(Generic Type)
Pressure
Gauge
Sight Gauge
FIGURE 5
FIGURE 6
Suction
Hose
Return
Pressure
Gauge
FIGURE 8