Replacement oil filter, General information / installation requirements – Alamo Axtreme 02984405 User Manual
Page 24
© 2006 Alamo Group Inc.
Section 3 - 4
Axtreme Boom (Asy. Man) 07/06
Replacement Oil Filter
Included in the packing box of this unit is a replacement filter element for filter assembly in the tank.
This Mower unit's hydraulic components have been carefully cleaned and packaged at the factory to
prevent contamination from entering the system. However, dust and dirt particles may enter into the
sealed components through transportation, handling, rain, or just sitting in a dirty or harsh environment.
Therefore to assure that the hydraulic system is properly clean, please prepare the area where the unit
is to be assembled. The area should be on a hard concrete floor that has been swept clean of all dust
and contaminants. Unpacked the Mower unit carefully so that the seals on the hydraulic components
are not broken or pulled off.
WARNING!
Before attempting to assemble the mower to the tractor, move the tractor to a clean
solid surface, preferably a concrete shop surface with an over head crane. The crane
should have a rated capacity to lift the heaviest component or assembly. A 5-ton crane
is recommended for the assembly work. If a smaller crane is used, be sure not to
exceed the rated capacity of the crane.
Q
Always follow all OSHA crane operating and inspection rules, regulations,
inspection requirements, and recommended practices when using the crane.
Q
Never work under any component that is lifted by the crane.
General Information / Installation Requirements
WARNING! Wear personal protective equipment when assembling the mower. As a minimum that
should include:
Q Safety Glasses
Q Safety Shoes
Q Gloves
Q Hard Hat
Q Hearing Protection
Q Welding Helmet
WARNING!
Before attempting to assemble ensure that the tractor engine is off and the tractor
transmission is in the park position with the parking brake engaged.
Q
Remove the engine key and keep it in your pocket to prevent inadvertent
starting or movement of the tractor.
Q
Place wheel blocks in front and behind the tractor wheels to prevent the tractor
from moving.
Q
Never attempt to start the tractor unless properly seated in the tractor seat
with the seat belt fastened around you.
Q
Never attempt to operate the tractor and mower controls unless seated in
the tractor seat with the seat belt fastened around you.
WARNING!
Securely block up and support the tractor before attempting to loosen and move the
tires. Failure to properly block up the tractor can result in the tractor to suddenly move
or fall, crushing you or another worker.
Q
Never work under any raised component or any component that is not
securely blocked up or supported.
WARNING!
Many components of this mower are very heavy and must be handled by proper
material handling equipment. Do not lift components that weight over 50lbs by
yourself.
Q
Use an overhead crane, forklift, or other coworkers to lift heavy items. Ensure
lifted components are securely supported.
Q
Never walk or work under a lifted component.