Spares part numbers, Summary of extra equipment – PASCO ME-6992B Advanced Structures Set User Manual
Page 36
®
A d v a n c e d S t r u c t u r e s S e t
S p a r e s P a r t N u m b e r s .
32
012-12719B
Spares Part Numbers.
*Nut and Bolt for PAStrack
Summary of Extra Equipment
ME-6985 Flexible I-Beam Set
ME-6997 Full Round (XYZ) Connectors
#5 Flexible Beam (24 cm) - 16
Full Round Connector - 6
#4 Flexible Beam (17 cm) - 16
Flat Connector - 6
#3 Flexible Beam (11.5 cm) - 16
1/4 - 20 Thumbscrew and Square Nut* - 6
ME-6986 Structures Rod Clamp - 2
ME-6998A Axle Spares
ME-6987 Flat Structures Members
1/2 by 1/4 by 1/4 Spacer - 12
Flat 3 x 4 Beam (19 cm) - 16
“O” Ring - 12
Flat #4 Beam (17 cm) - 16
Axle, Short (10.4 cm) - 2
Flat 2 x 3 Beam (12.5 cm) - 16
Axle, Medium (21.3 cm) - 2
ME-6993 Truss Set Members
Axle, Long (26.6 cm) - 2
#5 Beam (24 cm long) - 24
Collet - 24
#4 Beam (17 cm long) - 54
Pulley - 12
#3 Beam (11.5 cm long) - 54
Wheel - 4
#2 Beam (8 cm long) - 24
Tire - 4
#1 Beam (5.5 cm long) - 24
ME-6999A Angle Connector Spares
Half Round Connector - 42
Angle Connector - 24
ME-6994 Truss Set Screws
Straight Connector - 24
Screw (6 - 32) - 300
Sliding Connector - 12
ME-6996 Cord Lock Spares
Cord Tensioning Clip - 32
Cord, Braided, #18 Yellow - 1 roll
Extra Equipment (Model)
Where Used
Hooked Mass Set (SE-8759)
Boom, Teeter Totter, Back, Tower Crane, Arm, Angle Crane
Large Slotted Mass Set (ME-7566 or ME-7589)
Boom, Leg, Back, Arm, Angle Crane
Angle Indicator (ME-9495A)
Boom
Load Cells & Amplifier Set (PS-2199)
Boom, Leg, Back, Arm
Large Table Clamp (ME-9472)
Leg
Mass and Hanger Set (ME-8979)
Teeter Totter
Force Platform (PS-2141 or CI-6461)
Tower Crane