PASCO CI-6729 (1X) CONDUCTIVITY SENSOR - Manual (Page 4)

Conductivity Sensor 012–06485B
ii
Copyright Notice
The PASCO scientific Conductivity Sensor manual
(012-06485A) is copyrighted and all rights reserved.
However, permission is granted to nonprofit
educational institutions for reproduction of any part
of the Conductivity Sensor manual providing the
reproductions are used only for their laboratories
and are not sold for profit. Reproduction under any
other circumstances, without the written consent of
PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of
one year from the date of shipment to the customer.
PASCO will repair or replace at its option any part
of the product which is deemed to be defective in
material or workmanship. The warranty does not
cover damage to the product caused by abuse or
improper use. Determination of whether a product
failure is the result of a manufacturing defect or
improper use by the customer shall be made solely by
PASCO scientific. Responsibility for the return of
equipment for warranty repair belongs to the
customer. Equipment must be properly packed to
prevent damage and shipped postage or freight
prepaid. (Damage caused by improper packing of the
equipment for return shipment will not be covered by
the warranty.) Shipping costs for returning the equip-
ment after repair will be paid by PASCO scientific.
Copyright, Wa rr anty, and Equipment Return
Please—Feel free to duplicate this manual
subject to the copyright restrictions below.
Credits
Authors: Dominic Calabrese and Steve Miller
Editor:
Sunny Bishop
Equipment Return
Should the product have to be returned to PASCO
scientific for any reason, notify PASCO scientific by
letter, phone, or fax BEFORE returning the product.
Upon notification, the return authorization and
shipping instructions will be promptly issued.
➤ ➤ ➤ ➤ ➤ NOTE:
NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION FROM PASCO.
When returning equipment for repair, the units must
be packed properly. Carriers will not accept respon-
sibility for damage caused by improper packing. To
be certain the unit will not be damaged in shipment,
observe the following rules:
➀
The packing carton must be strong enough for the
item shipped.
➁
Make certain there are at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
➂
Make certain that the packing material cannot shift in
the box or become compressed, allowing the
instrument come in contact with the packing carton.
Address: PASCO scientific
10101 Foothills Blvd.
P.O. Box 619011
Roseville, CA 95678-9011
Phone: (916) 786-3800
FAX: (916) 786-3292
email: [email protected]
web: www.pasco.com