Diamond Products SL - Manual (Page 7)

1.3.7 Organize your working place
Organize your working place properly! Thereby
you will considerably reduce accident hazard!
1.3.8 Lighting of working place
Provide for sufficient lighting of working place.
1.3.9 Protection gear
Never start sawing before all protection gear is
attached and in place.
1.3.10 Flushing water
Ascertain that flushing water can not spill over
into electric installations. Avoid material dama-
ges by flushing water by exercising good con-
trol of the water’s draining flow.
1.4 During sawing
1.4.1 Rope ruptures
A rope rupture must be taken into account at any
time.
Observe the measures for avoiding rope ruptu-
res (see “Malfunction remedy”).
1.4.2 Motorized forward feed
Equipment with motorized forward feed are not
automates. During operation they must be su-
pervised at all times. A emergency shut-off must
be possible at any time.
1.4.3 Rotating and moving parts
Keep away from the rope and the pulleys. In
order to avoid being caught by rotating or mo-
ving parts wear tight clothes, and if having long
hear, wear a hair net!
1.5 After finishing work
After work pull out the power plug of the drive
unit to prevent unintentional switching on!
1.5.1 Removal of concrete and rock
pieces
Utilize suitable lifting equipment for the removal
of those pieces, in order to avoid injuries!
SL Safety instructions
sl9806e page 7