Diamond Products CB66DS - Manual (Page 25)

H30 Operation Manual Houston Street Technologies
5
1. Introduction
Houston Street Technologies’ Model H30 diesel engine controller was designed to provide simple, accurate and
consistent engine control for a variety of diesel power applications. When used with an ECU controlled engine
the H30 utilizes SAE J1939 CAN bus protocol to communicate desired engine control characteristics as well as
display all relevant engine operating parameters and fault codes, both stored and active.
In addition to its core functionality of MANUAL RAMP, MANUAL STEP, AUTO and ENGINE STALL
PROTECTION (ESP), the H30 can also be tailored to any customer’s request for a wide range of unique industrial
applications.
2. Specifications
Environmental Protection: IP65 (pending)
Operating Voltage: 8-32VDC
Operating Temperature: -20° to +70°C (-4 to +158°F) [without LCD heater]
Operating Temperature: -30° to +70°C (-22 to +158°F) [with LCD heater]
Storage Temperature: -30° to +80°C (-22 to +176°F)
Display: FSTN, LED Backlit, 240 X 320 Pixels, 3.9” Diagonal, Full Monochrome Graphics
Housing Connectors: (1) Deutsch DT04-12PA, (1) Deutsch DT04-12PB, (1) Deutsch DT04-12PC
Mating Connectors: (1) Deutsch DT06-12SA, (1) Deutsch DT06-12SB, (1) Deutsch DT06-12SC
Digital Outputs: (3) Dedicated SPST, 10 Amp Relays
(4) Programmable SPST, 3 Amp Relays
Digital Inputs: (8) Common Ground, Digital Inputs
Analog Inputs: (4) Programmable 4-20 mA, 0-5 VDC or Resistive Inputs
Standard Communications: J1939 CAN bus, RS485
Optional Communications: Cellular, RF (FUTURE DEVELOPMENT)