beautypg.com

Low level limit adjustment – Magnum Venus Plastech ULTRABOND 10:1 ADHESIVE UNIT User Manual

Page 35

background image

UltraBond 10:1 Operations Manual

Rev. 12/2012

Page | 35

Low Level Limit Adjustment:

1. To set the low level limit loosen the bolt holding the shaft collar in place.

2. Slide the shaft collar to the desire position on the post and tighten the bolt back down. (see figure 52)

fig. 52

Note: The valve (09321) for the ADP-1010 turns off the air supply to the air motor valve thus
stopping the pump.


















Loosen the bolt holding the
collar and slide the collar to
the desired location