Magnum Venus Plastech ULTRABOND 10:1 ADHESIVE UNIT - Manual (Page 33)

UltraBond 10:1 Operations Manual
Rev. 12/2012 Page | 33
Changing Empty Drum/Pail:
1. Position drum catch by sliding over base of drum rim (see fig. 47)
fig. 47
2. Turn ram control lever to “neutral” position
Fig. 48
3. Open the ball valve connected to the gauge and regulator marked Ram Extraction (see figure 49).
4.
Slowly turn up Ram Extraction regulator to 35 psi (see figure 49).
Fig. 49
5. Turn Ram control lever to “up” position
Fig. 50