Liquid Controls SP2200 - Manual (Page 16)

14
ENTER
STEP
3
REMARKS PRESS DISPLAY
This section of the menu is used to set up
the rate information.
Press the PRGM key to choose RPS (rate
per second) or SCALE (RPM, RPH). Press
ENTER to enter displayed choice.
Press PRGM to choose
÷
60 (RPM) or
÷
3600 (RPH). Press ENTER to enter dis-
played choice.
This sets the normalizing (averaging) fac-
tor. Press the arrow keys under the de-
sired digits to change. Press ENTER to
enter displayed value.
This sets the number of significant figures
to be displayed. Press the arrow key un-
der the digit to change. Press ENTER to
enter displayed value.
This sets the delay time (2 to 24 sec.) that
the unit will "look" for valid input data be-
fore the display falls to 0. Press the arrow
key under the digits to change. Press EN-
TER to enter displayed value.
factor
count
rate
rps
or
scale
z 60
or
z 3600
nor ##
figur #
dly #.#
ENTER
ENTER
PRGM
PRGM
PRGM
ENTER
SETTING
THE RATE
ENTER