Liquid Controls SP2200 - Manual (Page 15)

13
PRESS DISPLAY REMARKS
This section of the menu sets up the
counter and combination “C” informa-
tion.
This sets the decimal location for the
A,B&C counters. Press the arrow key
under the desired digit location. To
clear the decimal, press the arrow key
furthest to the right. Press the ENTER
key to enter the displayed location.
Press the program key to choose
Total or Ratio. Press the ENTER
key to enter the displayed choice.
This section will only appear if Total is
selected. Choose A SUB B (A subtract
B) or A ADD B. Press the ENTER key
to enter the displayed choice.
This section will only appear if RATIO
is selected. Choose A
÷
B or A
÷
A+B.
Press the ENTER key to enter the
displayed choice.
Press the PRGM key to choose
RESET ALL (resetting A,B&C displays)
or RESET 1 (resetting a choice of
either A or B display) Press the
ENTER key to enter the displayed
choice.
Press the PRGM key to choose
RESET A or RESET B. Press the
ENTER key to enter the displayed
choice.
Press the PRGM key to choose HIGH
CPS (0-9.99KHz) or LOW CPS (0-
40Hz). Press the ENTER key to enter
the displayed choice.
PRGM
PRGM
ENTER
ENTER
ENTER
ENTER
factor
count
dp loc
total
or
ratio
a sub b
or
a add b
a/b
or
a/a+b
rst al
or
rst 1
rst a
or
rst b
hi cps
or
lo cps
SETTING
THE
COUNTER
STEP
2
ENTER
ENTER
ENTER