Liquid Controls SP2850 (MS-649) - Manual (Page 23)

Sponsler, Inc. Model SP2850-TC with MS649 Page 23 DOC#: MN-2850
D 4-20MA
↓
D 0-5V
↓
D 0-10V
↓
D MANUAL
↓ (Press D to go to RTD ↓)
ENT (Selects displayed option) DN
↓ TEMP↓
(Press B for DN-Density D for TEMP-temperature)
ENT (When TEMP is selected) °C↓ °F↓ (Press B for °C, press D for °F)
ENT DEFLT TP (Followed by existing value)
CLR 0 (Flashing)
1 D 2 4 (As an example) 1.24 (Flashing)
(Press D for decimal, press C to change sign, i.e. + or -)
ENT TEMP LOW (Followed by existing value)
CLR 0 (Flashing)
1 0 D 0 (As an example) 10.0 (Flashing)
(Press D for decimal, press C to change sign, i.e. + or -)
ENT TEMP HIGH (Followed by existing value)
CLR 0 (Flashing)
1 0 0 D 0 (As an example) 100.0 (Flashing)
(Press D for decimal, press C to change sign, i.e. + or -)
ENT RUN MODE
STEP 11B: Setting Compensation Input for Analog (Density)
NOTE: If an analog input (mA or V) is desired, the unit must be ordered without the `R’ (RTD) option or jumper
changes made. See `Jumper Options’ page 24.
Press Display
D MENU Flashes to PRESET
↓
D until COMP IN
↓
ENT IN TYPE (Flashes to last type entered)
RTD
↓
D 4-20MA
↓
D 0-5V
↓
D 0-10V
↓