CTI Products TurboVUi Dispatch Client Software - Manual (Page 33)

TurboVUi Dispatch Software Installation and Configuration Guide
33
Levels tab
Use this tab to set the initial audio volume levels at program start-up.
Mic Volume
Select the initial microphone volume level. The initial setting for this parameter should be 100%. If
audio heard on portable and mobile radios is not loud enough, adjust the
Rear Mic Gain settings in CPS
for the Control Station radios (XPR4550s) connected to TurboVUi IP Gateways. See the CPS Setup for
Radio section of the TurboVUi IP Gateway Installation Guide S2-61534.
Select Volume
Select the initial receive volume level for Selected talk groups. The initial setting for this parameter
should be 100%.
Unselect Volume
Select the initial receive volume level for Unselected talk groups. The initial setting for this parameter
should be 60%.
Intercom Volume
Select the receive volume level from other TurboVUi Dispatch clients. The initial setting for this
parameter should be 60%.
Alert Sounds
Select the volume level for Alert Sounds, such as “Talk-Permit” and “Channel-Busy”. The initial setting
for this parameter should be 30%.
Click the button to save all Audio Configuration settings.